Supplier >
LABCONCO
Print…
You Searched For:
265 results were found
LABCONCO
Supplier:
LABCONCO
Description:
These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.
Supplier:
LABCONCO
Description:
FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.
Catalog Number:
(LBCP110410021)
Supplier:
LABCONCO
Description:
The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.
UOM:
1 * 1 items
Supplier:
LABCONCO
Description:
Glassware washing machines, Stand for washer
Supplier:
LABCONCO
Description:
Accessory for Freeze Dryer, FreeZone®
Supplier:
LABCONCO
Description:
Vacuum pump oil
Supplier:
LABCONCO
Description:
Hard duct exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)
Supplier:
LABCONCO
Description:
Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.
Catalog Number:
(LBCP3980422)
Supplier:
LABCONCO
Description:
Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.
UOM:
1 * 1 items
Supplier:
LABCONCO
Description:
These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).
Supplier:
LABCONCO
Description:
SpillStopper work surface, left side cupsink cutout, 1219×762×32 mm, 50 kg
Supplier:
LABCONCO
Description:
These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.
Supplier:
LABCONCO
Description:
All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.
Catalog Number:
(LBCP3820020)
Supplier:
LABCONCO
Description:
These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.
UOM:
1 * 1 items
Supplier:
LABCONCO
Description:
Digital airflow monitorwith epoxy coated steel housing, Gaurdian 1000, 4,5 kg
Catalog Number:
(LBCP322691150)
Supplier:
LABCONCO
Description:
These Biosafety cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. Cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research.
UOM:
1 * 1 items
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
